Only 1 left
Regular price $229.99
Steering Option

Use this text to encourage communication or promote sharing on social networks.

You can also add links

Be sure to check out our Current Lead Times before purchase.
 *Picture is of High Clearance Option*
*Be aware that the standard/straight bar kit may require clearancing of track bar bolt head, some bracket mounts, and spring perches and cannot be run with sway bar mounts in*

**If you want to retain the factory sway bar link mounts and ensure clearance of large aftermarket diff covers you must select the High Clearance Option Above**

***If you have a WJ Knuckle swap, this kit will not work for you as the tie rod and drag link are different sizes. 

Where other companies use .120" or .25" wall DOM we use 1.5" SOLID Rod!

The CavFab Crossover Steering kit will fit any Jeep XJ, TJ, ZJ, MJ, or LJ with the factory Dana 30 or Dana 44 front axle. Though, your knuckles and pitman will need to drill out to 5/8ths. (Ensure to use a solid cutting oil for lubricating during this process, or you may break your reamer. Something like most gear oils or a Tap Magic style cutting oil will work to keep it smooth)
  • 1.5" SOLID Tie Rod & Drag Link!
  • Fully Machined 
  • Quality Heat Treated Chromoly Heim Joints
  • Grade 8 Hardware INCLUDED
  • Standard or High Clearance Options
  • 4" of Backspacing or Numerically Less Required (Stock will not fit without wheel spacers)
  • 2.5"of lift or more required, topping out at a safe placement at 6"
  • Raw Steel Standard
  • Satin Black Powder Coating Optional
Our CavFab Crossover Steering kit can be ran either Under the Knuckle (UTK) or Over the Knuckle (OTK) after drilling.

Please Make Note of Which Kit You Need (Standard or High Clearance)